On November 19, the Illinois-based Global Electronics Association issued an industry warning titled “The PCB Squeeze: A Wake-Up Call for the Global Electronics Industry.” Its subtitle was even more direct: supply chain shortages threaten the next wave of AI and electronics. Chinese media outlets began publishing translated reports the following day, focusing largely on longer lead times and rising prices.
The report itself is more revealing than the press release. It offers three figures: in the year through September, orders rose 56.1% while shipments increased just 13.3%, and lead times for high-layer-count boards stretched to 16 to 20 weeks or longer. It also sets out a timeline: shortages will persist until at least the first half of 2027, with no meaningful relief before mid-2028. Its conclusion is unusually blunt for an industry group: the real risk is not that buyers cannot afford the products, but that they cannot obtain them.
Orders Are Rising Four Times Faster Than Shipments
Consider those three figures together. In the year through September, orders climbed 56.1%, compared with just 13.3% growth in shipments, more than a fourfold difference. The gap of more than 40 percentage points does not simply mean capacity is insufficient. It means capacity cannot keep pace with the speed at which orders are arriving.
The association used the word “availability,” not “price.” That distinction matters. Over the past two years, discussions in China about upstream supply constraints have typically started with price increases, as though pricing were the source of the problem. In this report, price is the consequence: because supply is unavailable, large customers are using long-term contracts to lock up capacity for the next several quarters. That leaves automotive, industrial, medical and defense customers at the back of the queue. The association says companies in these sectors are already reporting longer lead times and an inability to secure supplies.
The first buyers being squeezed out, then, are not those offering the lowest prices, but those without long-term contracts. Hyperscale cloud providers are currently the largest customers. They secure supply not by bidding up prices, but by buying out future capacity in advance. For a small or midsize manufacturer of industrial control boards, that means negotiating next year's production slots now. If those talks fail, it may have to redesign its products.
One recommendation to manufacturers is to avoid duplicate ordering. Read in reverse, that suggests some customers are already placing the same order with two suppliers and accepting whichever delivers first. The association offered no estimate of how much such duplication may be inflating order figures.
AI Server Boards Are Moving Toward 60 Layers
The report's most easily overlooked, yet arguably most important, point concerns layer counts. A conventional circuit board has around 12 layers. Boards for AI servers are moving toward 40 to 60 layers or more.
Layer count is not an abstract specification. A multilayer board is made by laminating sheets of copper-clad material together. Every additional layer consumes more fiberglass cloth, resin and copper foil. Increasing the count from 12 to 60 layers multiplies material consumption several times over.
That helps explain why AI, despite accounting for only part of electronics demand, can tighten the entire supply chain. The industry focuses on GPUs and HBM, rack power and liquid cooling, but rarely calculates the demands imposed by the board connecting those chips. Yet the board's layer count is one of the fastest-rising physical metrics in this cycle.
More layers also consume additional equipment time and production hours. A 60-layer board must be laminated one layer at a time. If any layer is misaligned or contaminated, the entire board is scrapped, with failures becoming more expensive later in the process. Advanced boards therefore require not only more material, but also more time on lamination equipment and in-line inspection systems, both of which are similarly constrained.
Boardmakers Have the Money, but Not the Materials
According to the association, at least $10 billion has been invested in new circuit board factories across Southeast Asia over the past three years, with China receiving at least as much over the same period. The capital is there.
But completing a factory does not mean boards immediately start rolling off the line. New facilities must still wait for fiberglass cloth, resin, copper foil and copper-clad laminates, all four of which are also in tight supply. The association's view is that adding boardmaking capacity alone will not solve the problem because the bottleneck sits farther upstream.
Upstream capacity operates on a different timeline. According to industry publication Evertiq, Mitsui Kinzoku's new copper foil plant in Malaysia will not begin production until April 2031. Only a handful of companies worldwide can manufacture fiberglass cloth, and the industry expects little additional capacity before the end of 2027. Other projects are also underway: Doosan is building a copper-clad laminate facility in Thailand, Ventec has opened its first Southeast Asian factory there, and Panasonic Industry has invested 92 billion yen to expand AI-related capacity.
These projects are moving in the right direction, but each will take three to five years. Money can buy equipment, but it cannot eliminate the time between firing up a furnace and achieving stable production, nor can it bypass the rounds of customer validation required for new materials.
The Association's Warning Is Aimed at Governments
The report's final section offers two sets of recommendations. Its three proposals for manufacturers are highly practical: share accurate demand forecasts across the supply chain, avoid duplicate ordering, and establish alternative sources for copper-clad laminates, prepreg and copper foil.
Its six recommendations for governments are to establish industry-linked lead-time warning channels; extend existing semiconductor incentives, including tax breaks for new equipment investment, to advanced circuit board and substrate manufacturing; accelerate approvals for new capacity; fund the development and certification of alternative materials; use priority-allocation mechanisms to put defense, aerospace, medical and critical infrastructure orders first; and provide targeted loan guarantees and grants to help smaller manufacturers weather the cycle.
Four of the six recommendations directly call for government funding or faster approvals. This is not a neutral market assessment.
The report quotes two statements from the association's chief advocacy officer, Chris Mitchell, that make its position explicit. One says the United States decided decades ago to outsource circuit board manufacturing and is now paying the price. The other says countries without an electronics industry strategy are effectively ignoring the central role of electronics technology. The accompanying figures show that the United States accounts for about 3% of global circuit board production, while Europe's share fell from 13.8% in 2000 to 2.2% in 2023 and continued to decline this fall. Unimicron closed its plant in Geldern, Germany, while Kubatronik filed for bankruptcy.
The report therefore has two audiences. Procurement managers are reading the lead-time forecasts; policymakers are reading the six recommendations. The supply-demand imbalance is real, and so are the industry's policy demands. Both can be true at the same time.
The Real Shortage Is in Boards With More Than 18 Layers
Look more closely, and “circuit board shortage” is an overly broad description.
According to market research firm Yole, boards with more than 18 layers will grow 15.7% annually through 2031, while conventional four- to six-layer boards will grow just 2.3%. AI-grade boards and materials currently account for about 30% of the overall circuit board market, a share expected to exceed 50% by 2031. Shengang Securities, citing data from Unimicron, estimates that the substrate material shortfall will reach about 20% in 2027.
In other words, the shortage is in advanced capacity and the specialized materials behind it. Conventional boards are not in short supply and may even face overcapacity in some segments.
Expansion plans in China point in the same direction. In late October, several leading boardmakers announced new capacity plans focused on high-end boards and substrate manufacturing processes. A review by Soochow Securities found that Victory Giant Technology, Kexiang, Avary, Red Board, Wus Printed Circuit, SCC, GCE and Fastprint all have financing or investment plans for 2026. Most of the expansion targets mSAP-type substrates and HDI, both of which are required by AI computing power hardware.
China's position in this supply chain differs from its role in memory chips. In memory, manufacturers control capacity allocation and downstream customers largely have to accept their prices. In circuit boards, more than 90% of global capacity is in Asia. China is both the largest manufacturing hub for boards and a major supplier of fiberglass cloth, copper foil and resin. The tighter upstream supply becomes, the more pricing power these segments gain. But the ability to make these materials is not the same as the ability to produce advanced grades. China's domestic industry is still scaling up production of high-end electronic glass cloth, ultra-low-profile copper foil and high-frequency resin.

Comments
00No comments yet. Be the first to weigh in.